DepthCube Z1024
DepthCube Z1024 is a 3D display sold by LightSpace Technologies, an American company, in about 2004.
The original DepthCube technology was developed by Dimensional Media Associates.[1]
It uses a stack of liquid crystal shutters.[2] It has 20 liquid-crystal layers.[3]
The DepthCube 3D display is a solid-state multi-planar volumetric display system in which a DLP high speed projector projects slices of a 3D scene onto a stack of liquid crystal scattering shutters.[1] The scattering shutters are based on polymer stabilized cholesteric texture (PSCT) material.[1]
It is a rear-projection based system.[1]
Initial research was funded by DARPA.[1]
It uses an FPGA.[1]
Construction[edit]
A prototype system used a 3-chip SVGA DLP video projector whose electronics were replaced with custom electronics that reduce the projector's bit depth to 5 bits per color while increasing its speed to 800 frames per second.[1]
References[edit]
- ↑ 1.0 1.1 1.2 1.3 1.4 1.5 1.6 Sullivan, Alan (2002). "LP‐1: Late‐News Poster: The DepthCube™ Solid‐state Multi‐planar Volumetric Display". SID Symposium Digest of Technical Papers 33 (1): 354–355. doi:10.1889/1.1832925. https://sid.onlinelibrary.wiley.com/doi/10.1889/1.1832925.
- ↑ Sullivan, Alan (2004-05-21). "DepthCube solid-state 3D volumetric display". p. 279–284. doi:10.1117/12.527543.
- ↑ "3 Deep". 2005-04-01. https://spectrum.ieee.org/3-deep.